Ponte Anteriore DANA 30 / Front Axle DANA 30
XJ CONNECTION by Gianmy http://digilander.libero.it/xjconnection/
dana 30 disconnect (with vacuum shift motor)
| Item | Description | |
|
1 |
Axle shaft assembly passenger side outer, without ABS, Includes #36 bushing installed (1984-91 XJ Cherokee)2 | |
|
1A |
Outer axle shaft without ABS (1984-91 XJ Cherokee)3 | |
|
2 |
Axle shaft seal passenger side (1984-91 XJ Cherokee) | |
|
3 |
Axle shaft passenger side inner (1984-91 XJ Cherokee) | |
|
4 |
Standard differential gear set (1984-91 XJ Cherokee) | |
|
4A |
Differential side gear thrust washer, 2 required (1984-91 XJ Cherokee) | |
|
5 |
Differential carrier bearing set, Includes 2 bearings & 2 cups (1984-91 XJ Cherokee) | |
|
6 |
Pinion and differential shim kit, Includes #19, #20, all parts in #6 & RTV silicone (1984-91 XJ Cherokee) | |
|
7 |
Ring gear bolt, 10 required (1984-91 XJ Cherokee) | |
|
8 |
Standard differential case (2.73-3.54 ratio,) Includes #9, carrier shim kit & #7 (1984-91 XJ Cherokee) | |
|
8 |
Standard differential case (3.73-4.88 ratio,) Includes #9, carrier shim kit & #7 (1984-91 XJ Cherokee) | |
|
9 |
Differential cover gasket (1984-91 XJ Cherokee) | |
|
10 |
Ring and pinion (3.07 ratio) 43-14 TEETH, Includes #6,7,9,11,12,13,15,16,17,19 & 20 (1984-91 XJ Cherokee)4 | |
|
10 |
Ring and pinion (3.54 ratio) 39-11 TEETH, Includes #6,7,9,11,12,13,15,16,17,19 & 20 (1984-91 XJ Cherokee)4 | |
|
10 |
Ring and pinion (3.73 ratio) 41-11 TEETH, Includes #6,7,9,11,12,13,15,16,17,19 & 20 (1984-91 XJ Cherokee)4 | |
|
10 |
Ring and pinion (4.10 ratio) 41-10 TEETH, Includes #6,7,9,11,12,13,15,16,17,19 & 20 (1984-91 XJ Cherokee)4 | |
|
10 |
Ring and pinion (4.56 ratio) 41-9 TEETH, Includes #6,7,9,11,12,13,15,16,17,19 & 20 (1984-91 XJ Cherokee)4 | |
|
10 |
Ring and pinion (4.88 ratio) 39-8 TEETH, Ring and pinion only4 | |
|
10A |
Ring and pinion installation kit for 4.88 ratio, Includes
#5,6,7,8,9,10,11,16,17,19,20 & gear marking compound (1984-91 XJ Cherokee) |
|
|
11 |
Inner pinion oil slinger (1984-91 XJ Cherokee) | |
|
12 |
Inner pinion bearing set, Includes 1 bearing & 1 cup (1984-91 XJ Cherokee) | |
|
13 |
Inner pinion bearing baffle (1984-91 XJ Cherokee) | |
|
14 |
Inner axle shaft seal driver side (1984-91 XJ Cherokee) | |
|
15 |
Outer pinion bearing set, Includes 1 bearing & 1 cup (1984-91 XJ Cherokee) | |
|
16 |
Outer pinion oil slinger (1984-91 XJ Cherokee) | |
|
17 |
Pinion oil seal (1984-91 XJ Cherokee) | |
|
18 |
Pinion yoke u-bolt type, u-bolts not included (1984-91 XJ Cherokee) | |
|
18 |
Pinion yoke strap and bolt type, strap and bolts not included (1984-91 XJ Cherokee) | |
|
18A |
Pinion yoke u-bolt kit, per yoke (for yoke #248091X) | |
|
18B |
Pinion yoke strap and bolt kit, per yoke (for yoke #2465611) | |
|
19 |
Pinion nut washer (1984-91 XJ Cherokee) | |
|
20 |
Pinion nut (1984-91 XJ Cherokee) | |
|
21 |
Spicer axle shaft universal joint, per axle, non-greaseable style (1984-91 XJ Cherokee)1 | |
|
21 |
Spicer axle shaft universal joint, per axle, greaseable style (1984-91 XJ Cherokee)1 | |
|
22 |
Axle shaft assembly driver side without ABS (1984-91 XJ Cherokee)2 | |
|
23 |
Stainless steel differential cover, Includes bolts & gasket (1984-91 XJ Cherokee) | |
|
24 |
Front axle disconnect shift fork collar (1984-91 XJ Cherokee) | |
|
25 |
Front axle disconnect shift fork (1984-91 XJ Cherokee) | |
|
26 |
Front axle disconnect servo motor retaining clip (1984-91 XJ Cherokee) | |
|
27 |
Front axle disconnect shift fork insert, 2 required (1984-91 XJ Cherokee) | |
|
28 |
Front axle disconnect servo o-ring (1984-91 XJ Cherokee) | |
|
29 |
Differential cover bolt, quantity: as needed (1984-91 XJ Cherokee). Not Shown | |
|
30 |
Front axle disconnect motor assembly, Includes gasket #34, fork retainer clips, cover bolts & washer (1984-90 XJ Cherokee) |
|
|
30 |
Front axle disconnect motor assembly (1991 XJ Cherokee) | |
|
31 |
Front axle disconnect housing cover (1991 XJ Cherokee) | |
|
32 |
Front axle disconnect switch assembly (1991 XJ Cherokee) | |
|
33 |
Front axle disconnect shift fork snap ring (1984-91 XJ Cherokee) | |
|
34 |
Front axle disconnect cover gasket (1984-91 XJ Cherokee) | |
|
35 |
Inner bushing/bearing (1984-89 XJ Cherokee) | |
|
35 |
Inner bushing/bearing (1990-91 XJ Cherokee) | |
|
36 |
Outer bearing (1984-89 XJ Cherokee) | |
|
36 |
Outer bushing (1990-91 XJ Cherokee) | |
|
1 - 1.06" bearing cap diameter 2 - Non CV-type axle shaft assemblies |
3 - Uses 260X type
universal joint 4 - These ring and pinions are reverse rotation |
|
| Item | Description | |
|
1 |
Outer axle dust shield (1985-00 XJ Cherokee) | |
|
2 |
Spicer axle shaft universal joint per axle, non-greaseable style (1985-94 XJ Cherokee, 1992-94 Grand Cherokee)4 | |
|
2 |
Spicer axle shaft universal joint per axle, greaseable style (1985-94 XJ Cherokee, 1992-94 Grand Cherokee)4 | |
|
2 |
Spicer axle shaft universal joint per axle, non-greaseable style (1995-00 XJ Cherokee, 1995-98 Grand Cherokee)5 | |
|
3 |
Inner axle dust shield (1985-00 XJ Cherokee, 1992-98 Grand Cherokee) | |
|
4 |
Inner axle shaft seal (1985-00 XJ Cherokee, 1992-01 Grand Cherokee) | |
|
5 |
Collapsible pinion spacer (2000 XJ Cherokee, 1996-01 Grand Cherokee)1 ,3Not Shown | |
|
6 |
Outer pinion bearing set, Includes 1 bearing and 1 cup (1985-00 XJ Cherokee, 1992-01 Grand Cherokee) | |
|
7 |
Outer pinion oil slinger (1985-00 XJ Cherokee, 1992-01 Grand Cherokee) | |
|
8 |
Pinion oil seal (1985-00 XJ Cherokee, 1992-98 Grand Cherokee) | |
|
9 |
Pinion yoke strap and bolt style; strap and bolts not included (1985-00 XJ Cherokee, 1992-98 Grand Cherokee) | |
|
9 |
Pinion yoke u-bolt type; u-bolts not included (1985-00 XJ Cherokee, 1992-98 Grand Cherokee) | |
|
9A |
Pinion yoke u-bolt kit, per yoke (for yoke Part #248091X) | |
|
9B |
Pinion yoke strap and bolt kit, per yoke (for stock yoke & part #2465611) | |
|
10 |
Pinion nut washer (1985-00 XJ Cherokee, 1992-01 Grand Cherokee) | |
|
11 |
Pinion nut (1985-00 XJ Cherokee, 1992-01 Grand Cherokee) | |
|
12 |
Axle shaft assembly driver side with ABS (1992-00 XJ Cherokee, 1992-98 Grand Cherokee) | |
|
12 |
Axle shaft assembly driver side without ABS (1985-00 XJ Cherokee) | |
|
12A |
Outer axle shaft without ABS (1985-94 XJ Cherokee)6 | |
|
13 |
Standard differential gear set, Includes #24 & ten of #19 (1985-00 XJ Cherokee, 1992-01 Grand Cherokee) | |
|
13A |
Differential side gear thrust washer, 2 required (1985-00 XJ Cherokee, 1992-01 Grand Cherokee) | |
|
14 |
Axle shaft assembly passenger side with ABS (1992-00 XJ Cherokee, 1992-98 Grand Cherokee) | |
|
14 |
Axle shaft assembly passenger side without ABS (1985-00 XJ Cherokee) | |
|
14A |
Outer axle shaft without ABS (1985-94 XJ Cherokee)6 | |
|
15 |
Inner pinion bearing baffle (1985-00 XJ Cherokee, 1992-98 Grand Cherokee) | |
|
16 |
Pinion and differential bearing shim kit, Includes # 16, 10, 11, 16 & pinion preload shims (1985-00 XJ Cherokee)2 | |
|
16 |
Pinion and differential bearing shim kit, Includes #16, 10, 11, 16 (2000 XJ Cherokee, 1992-98 Grand Cherokee)1 | |
|
17 |
Inner pinion bearing set, Includes 1 bearing & 1 cup (1985-00 XJ Cherokee, 1992-01 Grand Cherokee) | |
|
18 |
Inner pinion oil slinger (1985-00 XJ Cherokee, 1992-01 Grand Cherokee) | |
|
19 |
Ring gear bolt, 10 required (1985-00 XJ Cherokee, 1992-01 Grand Cherokee) | |
|
20 |
Ring and pinion (3.07 ratio) 43-14 TEETH, Includes #6,7,8,10,11,15,16,17,18,19 & 24 (1985-00 XJ Cherokee)2 | |
|
20 |
Ring and pinion (3.54 ratio) 39-11 TEETH, Includes #6,7,8,10,11,15,16,17,18,19 & 24 (1985-00 XJ Cherokee)2 | |
|
20 |
Ring and pinion (3.73 ratio) 41-11 TEETH, Includes #6,7,8,10,11,15,16,17,18,19 & 24 (1985-00 XJ Cherokee)2,7 | |
|
20 |
Ring and pinion (4.10 ratio) 41-10 TEETH, Includes #6,7,8,10,11,15,16,17,18,19 & 24 (1985-00 XJ Cherokee)2,7 | |
|
20 |
Ring and pinion (4.56 ratio) 41-9 TEETH, Includes #6,7,8,10,11,15,16,17,18,19 & 24 (1985-00 XJ Cherokee)2,7 | |
|
20 |
Ring and pinion (4.88 ratio) 39-8 TEETH, Ring & Pinion only (1985-00 XJ Cherokee)2,7 | |
|
20A |
Ring and pinion installation kit for 4.88 ratio Includes #5,6,8,10,11,16,17,19,22 & 24 & gear marking compound (1985-00 XJ Cherokee)2 | |
|
20 |
Ring and pinion (3.07 ratio) 43-14 TEETH, Includes #5,6,7,8,10,11,15,16,17,18,19 & 24 (2000 XJ Cherokee)1,8 | |
|
20 |
Ring and pinion (3.55 ratio) 39-11 TEETH, Includes #5,6,7,8,10,11,15,16,17,18,19 & 24 (2000 XJ Cherokee, 1996-98 Grand Cherokee)1,3, 8 | |
|
20 |
Ring and pinion (3.73 ratio) 41-11 TEETH, Includes #5,6,7,8,10,11,15,16,17,18,19 & 24 (2000 XJ Cherokee, 1996-98 Grand Cherokee)1,3,8 | |
|
20 |
Ring and pinion (4.10 ratio) 41-10 TEETH, Includes #5,6,7,8,10,11,15,16,17,18,1 9& 24 (2000 XJ Cherokee, 1996-98 Grand Cherokee)1,3,8 | |
|
20 |
Ring and pinion (4.56 ratio) 41-9 TEETH Ring & Pinion only (2000 XJ Cherokee, 1996-98 Grand Cherokee)1,3, 8 | |
|
20 |
Ring and pinion (4.88 ratio) 39-8 TEETH, Ring and Pinion only (2000 XJ Cherokee, 1996-98 Grand Cherokee)1,3, 8 | |
|
20A |
Ring and pinion installation kit for 4.56 & 4.88 ratio,
Includes #5,6,8,10,11,16,17,19,22 & 24 & gear marking compound (2000 XJ Cherokee, 1996-98 Grand Cherokee)1,3 |
|
|
21 |
Standard differential case (3.07-3.55 ratio), Includes #24, ten of #19, & carrier shim kit (1985-00 XJ Cherokee, 1992-98 Grand Cherokee) | |
|
21 |
Standard differential case (3.73-4.88 ratio), Includes #24, ten of #19, & carrier shim kit (1985-00 XJ Cherokee, 1992-98 Grand Cherokee) | |
|
22 |
Differential carrier bearing set, Includes 2 bearings & 2 cups (1985-00 XJ Cherokee, 1992-01 Grand Cherokee) | |
|
23 |
Outer axle shaft with ABS (1995-00 XJ Cherokee, 1995-98 Grand Cherokee) | |
|
24 |
Differential cover gasket (1985-00 XJ Cherokee, 1992-98 Grand Cherokee) | |
|
25 |
Differential cover bolt (Qty. as needed) 1985-00 XJ Cherokee, 1992-98 Grand Cherokee) | |
|
26 |
Stainless steel differential cover, Includes bolts and gasket (1985-00 X Grand Cherokee)2Not Shown | |
|
26 |
Stainless steel differential cover, Includes bolts and gasket (2000 XJ Cherokee, 1992-98 Grand Cherokee)1 | |
|
27 |
RTV silicone, 3 oz. Tube, for use as a gasket Not Shown
|
|
| 1 - not for 2000 XJ Bill of Material #610976 & 610977 | 5 - 1.18" bearing cap diameter | |
| 2 - Only for 2000 XJ with Bill of Material #610976 & 610977 | 6 - Uses 260X type universal joint | |
| 3 - Only for 1996 ZJ Bill of Material #610572 & 610573 | 7 - These ring and pinions are reverse rotation | |
| 4 - 1.06" bearing cap diameter | 8 - These ring and pinions are standard rotation | |
PER L'IDENTIFICAZIONE DEI PONTI CONSULTARE LE SEGUENTI PAGINE SU JEEPTELEVISION.COM:
http://www.jeeptelevision.com/ponti%20jeep/index.htm
http://www.jeeptelevision.com/ponti%20jeep/identificareunponte.htm
ALTRE INFORMAZIONI E LINKS SU PONTI E DIFFERENZIALI AI SEGUENTI LINKS:
http://www.jeeptelevision.com/forum/topic.asp?TOPIC_ID=375
http://www.jeeptelevision.com/ponti%20jeep/index.htm
INFORMAZIONI COMPLETE SU TUTTI I PONTI E I DIFFERENZIALI JEEP CON SPECIFICHE TECNICHE E ARTICOLI SU AGGIORNAMENTI E MODIFICHE:
http://www.off-road.com/jeep/tech/AxleGeneral.html
