ET-545 Cordless Telephone (430-1045) Troubleshooting Faxback Doc. # 39509 We do not expect you to have any problems with your telephone, but if you do, the following suggestions might help. If you still have problems, check other phones on the same line to see if they work properly. If they do and the problem does not seem to be with your phone service, take the phone to your local Radio Shack store for assistance. Problem Solutions The handset does not work. Be sure POWER is set to ON. Move the handset closer to the base. Be sure the phone line cord and AC adapter are correctly and securely connected. Be sure the battery pack is connected and charged. Fully extend the base's antenna vertically. Return the handset to the base for 5 seconds, then try again. Volume drops or you hear Someone has picked up another phone on unusual sounds. the same line. Hang up the other phone. Call is noisy. Do not place the base near appliances or large metal objects. Keep the handset away from interference sources such as computers, remote control toys, wireless microphones, wireless alarm systems, wireless intercoms and room monitors, fluorescent lights, and electrical appliances. If the interference is severe, turn off the interfering device. Press CH to switch to another channel. Hang up and redial the number. Phone does not dial more Store the local area code than 7 digits when dialing (see "Preparation," Faxback Doc. # 39507). from a Caller ID record. The handset's range Fully extend the base's antenna vertically. decreases. Return the handset to the base to recharge the battery pack Be sure the base's antenna is not touching a metal surface. Receiver sound flutters Be sure the battery pack is charged. or fades. Fully extend the base's antenna vertically. Move the handset closer to the base. Can make calls, but Be sure POWER is set to ON. telephone does not ring. Telephone company may be using unusual ringing methods. Your telephone is designed for standard straight line bridged ringing. Can receive calls, but Set TONE/PULSE correctly for the type of cannot make calls. service you have. You cannot answer/make a Unplug and plug AC power to reset the call and the handset sounds automatic security access code. an error tone when you lift it from the base or press TALK. (br/km-05/14/1997)