Montreal Fox Controller Updates
The following files for this project are available for FTP download at this 00001010 0 10 S 00001000 0 8 T - 00000011 0 3 U - 00001100 0 12 V
ECE476 SP05 Final Project - PC temperature monitoring and control unit
output voltages are measured to ensure that they are linear between 0-12V. also tested at the port pins to make sure that they switch between 0-5V.
HeadWize - Project: A 50mW Class-A Headphone Amplifier by Rohit
Also, the power transformer needs to have a secondary rated at 12-0-12V/300mA to cater to the 10V regulators. The rest of the PSU need not be changed.
the Otherpower.com Discussion Board || 6v to 12v battery switch
6v to 12v battery switch | 6 comments (6 topical, 0 editorial) INTERESTING project for someone with time available. Nanotech the ball is yours,
MOTION DETECTOR ACTIVATED LIGHT
Connect the positive lead from the light to the +V connector on the Poly Block and the negative lead to the S0 (Switch 0) connector (Fig. 4.1).


HeadWize - Project: A 50mW Class-A Headphone Amplifier by Rohit
Also, the power transformer needs to have a secondary rated at 12-0-12V/300mA to cater to the 10V regulators. The rest of the PSU need not be changed.
the Otherpower.com Discussion Board || 6v to 12v battery switch
6v to 12v battery switch | 6 comments (6 topical, 0 editorial) INTERESTING project for someone with time available. Nanotech the ball is yours,
MOTION DETECTOR ACTIVATED LIGHT
Connect the positive lead from the light to the +V connector on the Poly Block and the negative lead to the S0 (Switch 0) connector (Fig. 4.1).
Project Group 14 Answers
PROJECT GROUP 14 1. 1 HZ 2. HIGH 3. 1 HZ 4. LOW 5. LOW 6. 2 VOLTS 7. 1 HZ 8. HIGH 9. OFF, HIGH 10. ON, ON, 0, 12 11. OFF, OFF, +12V*, ZERO 12. 1 13. 0 14. 1
Universal Relay Board, Project to build, Multi input Relay Driver
12v DC operation, DPDT Relay controller. Defined from Zero to Full Supply voltage, eg 0 -12 V. switch or a computer / logic controlled switch.
ECE 345 Projects
This project takes power from a single 12 V lead-acid battery and controls the an IC designed particularly for control of switching power converters.
KTH Research Project Database - RF MEMS switching circuits and
KTH Research Project Database - RF MEMS switching circuits and applications. and actuation voltages as low as 12 V. This design offers also an active
Yet Another ATX Lab Bench Power Supply Conversion
Materials Banana jacks Project box A lighted 12V switch 3/4" strain relief ATX connector (purchased or scavanged) Miscellaneous heat shrink tubing sizes