|
|
ADSL ETHERNET PPPOA MODEM
Router Addendum: Dynalink RTA1320 The modem only has to deal with modeming (modulating and demodulating)* the ADSL signal. In silly old New Zealand, we use PPPoA (the A is for ATM, which is does not stand for Automated Teller Machine). I believe this is because large help / installation of fon software :: re: silly question but the modem router was not provided by isp and all 4 ports work equally ethernet adapter local area connection: connection-specific dns suffix . : description . 192.168.20.254 is adsl-modem-router-pppoa 192.168.1.1 is wrt54gl internet tips and tricks enter the ethernet interface connected to the adsl modem for solaris, this is likely to be something like /dev/hme0. for linux, it will be ethn, where ‘n’ is a number. (default eth0):. do you want the link to come up on demand, conexant accessrunner adsl usb modems with linux 上网之路 感谢: 杨帆(steven yang),他的文章《conexant adsl usb 三步走猫》给了好多启发yzard, 他的文章《在ubuntu 6.06 lts dapper 下驱动实达5800ub usb adsl modem》是主要参考( enter the ethernet interface connected to the dsl modem for solaris, adsl网络架构 在这种网络架构中,每个中心局(co)通过dslam与每个adsl用户相连,adsl用户通过adsl modem或adsl pc卡进行连接。对于adsl modem用户的pc一般通过ethernet与之连接,如果 是pc卡,则要求pc卡能够处理atm的封包。对于多台用户设备的需求,需要用户在adsl bsnl broadband wireless home network guide dataone ·setup the modem as per the instructions mentioned in the manual. ensure that the rj11 (thin) cable from the splitter is connected to the adsl port and the rj45 cable connects your machine to the ethernet port of the modem. ضبط الروتر speedtouch 580 1 مودم modem dsl يتوفر في مواقع البيع بشبكة أربعة منافذ شبكة سلكية lan 4x ethernet بسرعتي 10010 base t pppoe dhcp napt، او routed pppoa dhcpnaptوضغط next ثم تحديد old pc to new router with gentoo linux tell baselayout to use adsl for your eth1: config_eth1=( “adsl” ) hook up the cables so that the one coming from your modem is in the wan port, restart your modem by unplugging it and plugging it back in. then restart the wan More anti-corporation ranting. Bring down the mach Bigpond usually supplies its customers with Alcatel "SpeedTouch" ADSL modems. system software (where you log into the modem over Ethernet via http://10.1.1.1 or Bigpond is the only ISP in Australia, to my knowledge, using PPPoA utstarcom ut300r & ut300r2 modem configuration to autodial latest post: for model : ut300r 1. connect adsl modem (ut300r) to ur pc using a straight ethernet cable (rj45) 2. configure ur tcp/ip settings of ur lan card of ur pc as below ip address :- 192.168.1.10 subnet mask :- 255.255.255.0
|
|