LUBRICANTS and Lubricated O-Rings

A correct lubrication eliminates any inconvenience due to dry operational use, seasoning, the ageing of the elastomer and the sticking to countersurfaces when not in use. We can provide supplies of pre-treated O-Rings with a wide range of lubricants such as Molybdenum Disulfide, Graphite, Parker Super-O-Lube and HDxxxW series of greases.
Contact our technical office for advise on the most suitable lubricant for your requirements.

SPECIAL LUBRICANTS FOR O-RINGS, SEALS AND PLASTIC MATERIALS

Commercial type
chemical nature
operational temperature
Applications
Parker O-Lube
thickened mineral oil
-30 +120°C
 Installation lubricant for pneumatic seals, lubrication of pneumatic components.
Parker Super-O-Lube
Silicone
-55 +200°C
 Multi-use lubricant, also allowed for alimentary use.  NBR ageing protection, lubrication "for-life" of the pneumatic components, use in vacuum, water and "hard" water. Lubrication of plastic/plastic and plastic/metal couples.
HD300WP
Silicone
-70 +160°C
 For very low temperatures,  for use in for example Super-O-Lube
HD300
Silicone
-70 +160°C
 Lubrication of plastic/plastic and plastic/metal couples. Bridge bearings. Not advised for elastomers.
HD900TF
PTFE
-70 + 120°C
 Compatible with all elastomers, allowed for alimentary use, high vacuum,  methane valves, great chemical resistance.
NOTICE!:The siliconical lubricants are not compatible to siliconic rubbers.
© Copyright  HD Slippers srl  1998 all rights reserved