 |
The
P-94 pickup comes with two
insulated lead wires plus a bare
wire twisted with a green lead
(note: there may be a red wire
included, this is a "dead" lead
which you may cut). Connect
either the white or black lead
wire to the volume control and
connect the other lead to
ground.
If
you get a thin sound with both
pickups in operation, you may
need to change the polarity of
the pickup. Simply reverse the
lead wires to do this. If you
are using both the P-94T and
P-94R together, use the black
lead on one position, and the
white lead for the other. This
will give you hum-cancelling
operation when both pickups are
in use. |
